Global

Members

(private, constant) featureTypeToRenderer

Source:
Properties:
Name Type Description
featureTypeToRenderer Object

Maps GeoJSON geometry types to a set of default renders defined in GlobalStorage.DefaultRenders

(constant) serviceType

Source:
Properties:
Name Type Description
serviceType Object

Different types of services that a URL could point to

Methods

addHilight(graphic)

Source:

Add a graphic or array of graphics to the highlight layer. Remove any previous graphics.

Parameters:
Name Type Description
graphic Graphic | Array

an ESRI graphic, or array of ESRI graphics. Should be in map spatialReference, and not bound to a layer

addPin(point)

Source:

Add a graphic to indicate where user clicked.

Parameters:
Name Type Description
point Point

an ESRI point object to use as the graphic location

allComb(M, N)

Source:

Generate all permutations of length M, with exactly N true values.

Parameters:
Name Type Description
M int

the size of the array (must be greater than 0)
N int

the number of entries which should be true (must not be greater than M)
Returns:

an array containing all possible size M arrays of boolean values with N true entries

(private) allocateLayersToSections(layers, sectionsAvailable, mapHeight)

Source:
Parameters:
Name Type Description
layers Array

a list of layers to be updated (modified in place)
sectionsAvailable int

the maximum number of sections to use
mapHeight int

the rendered height of the map image
Returns:

the same layers array as passed in

(private) arrayBufferToString(buffer) → {String}

Source:

Converts an array buffer to a string

Parameters:
Name Type Description
buffer Arraybuffer

an array buffer containing stuff (ideally string-friendly)
Returns:

array buffer in string form

Type
String

assignIds()

Source:

Performs in place assignment of integer ids for a GeoJSON FeatureCollection. If at least one feature has an existing id outside the geoJson properties section, the original id value is copied in a newly created property ID_FILE of the properties object and the existing id value is replaced by an autogenerated number. Features without existing id from that same dataset will get a new properties ID_FILE with an empty string as value.

If at least one feature has an existing OBJECTID inside the geoJson properties section, the original OBJECTID value is copied in a newly created property OBJECTID_FILE of the properties object and the existing OBJECTID value is replaced by an autogenerated number. Features without existing OBJECTID from that same dataset will get a new properties OBJECTID_FILE with an empty string as value.

(private) assignLayerSplits(layers, splitPoints)

Source:

Convenience function for assigning the splitBefore property on layers at specified points. NOTE: this function modifies data in place

Parameters:
Name Type Description
layers Array

a list of layers to be updated (modified in place)
splitPoints Array

an array of boolean values indicating if the layer list should be split at that point (must be layers.length-1 in size)
Returns:

layers the same array as passed in

checkProj(spatialReference, epsgLookup) → {Object}

Source:

Check whether or not a spatialReference is supported by proj4 library.

Parameters:
Name Type Description
spatialReference Object

to be checked to see if it's supported by proj4
epsgLookup function

an optional lookup function for EPSG codes which are not loaded in the proj4 definitions, the function should take a numeric EPSG code and return a Promise resolving with a proj4 style definition string
Returns:

with the structure { foundProj: (bool) indicates if the projection was found, message: (string) provides a reason why the projection was not found, lookupPromise: (Promise) an optional promise resolving with true or false if a lookup function was provided and had to be invoked }

Type
Object

clearHilight()

Source:

Remove hilight from map

(private) clipExtentCoords(mid, max, min, mapMax, mapMin, len) → {Array}

Source:

Compares to sets of co-ordinates for extents (valid for both x and y). If center of input co-ordinates falls outside map co-ordiantes, function will adjust them so the center is inside the map co-ordinates.

Parameters:
Name Type Description
mid Numeric

middle of the the range to test
max Numeric

maximum value of the range to test
min Numeric

minimum value of the range to test
mapMax Numeric

maximum value of the map range
mapMin Numeric

minimum value of the map range
len Numeric

length of the adjusted range, if adjusted
Returns:

two element array of Numeric, containing result max and min values

Type
Array

cloneLayerGraphic(graphic) → {Object}

Source:

Clone a graphic from a map-bound layer.

Parameters:
Name Type Description
graphic Graphic

an ESRI graphic that resides in a map layer.
Returns:

an unbound copy of the graphic

Type
Object

convertImageToCanvas(url, canvas, crossOrigin) → {Promise}

Source:

Convert an image to a canvas element

Parameters:
Name Type Default Description
url String

image url to convert (result from the esri print task)
canvas Object null

[optional = null] canvas to draw the image upon; if not supplied, a new canvas will be made
crossOrigin Boolean true

[optional = true] when set, tries to fetch an image with crossOrigin = anonymous
Returns:

conversion promise resolving into a canvas of the image

Type
Promise

convertImagetoDataURL(imageUri, imageType) → {Promise}

Source:

Loads an image (as crossing) and converts it to dataURL. If a supplied imageUri is already a dataURL, just return it. If an image fails to load with the crossing attribute, return the original imageUri

Parameters:
Name Type Description
imageUri String

url of the image to load and convert
imageType String

[optional = 'image/png'] format of the image representation
Returns:

promise resolving with the dataURL of the image

Type
Promise

(private) crawlLayerInfos(layerInfos, urlMap)

Source:

Recursively crawl a wms layer info structure. Store any legends in the provided map object.

Parameters:
Name Type Description
layerInfos Array

array of ESRI WMSLayerInfo objects
urlMap Map

a Map of sublayer names to legend urls

(private) createAttribSet(oidField, featureData) → {Object}

Source:

Will generate attribute package with object id indexes

Parameters:
Name Type Description
oidField String

field containing object id
featureData Array

feature objects to index and return
Returns:

object containing features and an index by object id

Type
Object

csvPeek(csvData, delimiter) → {Array}

Source:

Peek at the CSV output (useful for checking headers)

Parameters:
Name Type Description
csvData string

the CSV data to be processed
delimiter string

the delimiter used by the data
Returns:

an array of arrays containing the parsed CSV

Type
Array

enforceBoundary(extent, maxExtent) → {Object}

Source:

Checks if the center of the given extent is outside of the maximum extent. If it is, will determine an adjusted extent with a center inside the maximum extent. Returns both an indicator flag if an adjustment happened, and the adjusted extent.

Parameters:
Name Type Description
extent Object

an ESRI extent to test
maxExtent Object

an ESRI extent indicating the boundary of the map
Returns:

an object with two properties. adjusted - boolean, true if extent was adjusted. newExtent - object, adjusted ESRI extent

Type
Object

enhanceRenderer(renderer, legend) → {Promise}

Source:

Will add extra properties to a renderer to support images. New properties .svgcode and .defaultsvgcode contains image source for app on each renderer item.

Parameters:
Name Type Description
renderer Object

an ESRI renderer object in server JSON form. Param is modified in place
legend Object

object for the layer that maps legend label to data url of legend image
Returns:

resolving when the renderer has been enhanced

Type
Promise

extractFields()

Source:

Extracts fields from the first feature in the feature collection, does no guesswork on property types and calls everything a string.

findClosestLOD(lods, scale) → {Object}

Source:

Finds the level of detail closest to the provided scale.

Parameters:
Name Type Description
lods Array

list of levels of detail objects
scale Number

scale value to search for in the levels of detail
Returns:

the level of detail object closest to the scale

Type
Object

(private) findOptimalSplit(layer, splitCount)

Source:

Find the optimal split points for the given layer.

Parameters:
Name Type Description
layer Object

a layer object to be split into splitCount parts
splitCount int

the number of pieces which the layer should be broken into
Returns:

a reference to the layer passed in

generateLocalCanvas(map, options, canvas) → {Promise}

Source:

Create a canvas from the user added layers (svg tag)

Parameters:
Name Type Default Description
map Object

esri map object
options Object null

[optional = null] { width, height } values; needed to get canvas of a size different from default width {Number} height {Number}
canvas Object null

[optional = null] canvas to draw the image upon; if not supplied, a new canvas will be made
Returns:

resolving when the canvas have been created resolve with a canvas element with user added layer on it

Type
Promise

(private) generatePlaceholderSymbology(name, colour) → {Object}

Source:

Generates a placeholder symbology graphic. Returns a promise for consistency

Parameters:
Name Type Description
name String

label symbology label
colour String

colour to use in the graphic
Returns:

symbology svg code and its label

Type
Object

generateServerImage(esriBundle, geoApi, map, options) → {Promise}

Source:

Generate the image from the esri print task

Parameters:
Name Type Description
esriBundle Object

bundle of API classes
geoApi Object

geoApi to determine if we are in debug mode
map Object

esri map object
options Object

options for the print task url - for the esri geometry server format - output format width - target image height if different from default height - target image width if different from default
Returns:

resolving when the print task created the image resolve with a "response: { url: value }" where url is the path for the print task export image

Type
Promise

generateUUID() → {String}

Source:

Get a 'good enough' uuid. For backup purposes if client does not supply its own unique layer id

Returns:

a uuid

Type
String

generateWMSSymbology(name, imageUri) → {Promise}

Source:

Generates svg symbology for WMS layers.

Parameters:
Name Type Description
name String

label for the symbology item (it's not used right now, but is required to be consistent with other symbology generating functions)
imageUri String

url or dataUrl of the legend image
Returns:

a promise resolving with symbology svg code and its label

Type
Promise

geomToGraphic(geometry, symbol) → {Object}

Source:

Generating a graphic from server geometry.

Parameters:
Name Type Description
geometry Object

feature geometry conforming to ESRI Geometry standard
symbol Object

esri symbol in server format
Returns:

an ESRI GraphicsLayer

Type
Object

getAttribs(childIndex) → {Promise}

Source:

Returns attribute data for a child layer.

Parameters:
Name Type Description
childIndex String

the index of the child layer
Returns:

resolves with a layer attribute data object

Type
Promise

getAttribs() → {Promise}

Source:

Returns attribute data for this FC.

Returns:

resolves with a layer attribute data object

Type
Promise

getAttribs() → {Promise}

Source:

Returns attribute data for this layer.

Returns:

resolves with a layer attribute data object

Type
Promise

getExtentFromJson(extentJson) → {Object}

Source:

Create an ESRI Extent object from extent setting JSON object.

Parameters:
Name Type Description
extentJson Object

that follows config spec
Returns:

an ESRI Extent object

Type
Object

getFeatureName(objId, attribs) → {Promise}

Source:

Extract the feature name from a feature as best we can. Support for dynamic layers is limited at the moment. // TODO explain this comment

Parameters:
Name Type Description
objId String

the object id of the attribute
attribs Object

optional. the dictionary of attributes for the feature. uses internal attributes if not provided.
Returns:

resolves with the name of the feature

Type
Promise

getGraphicIcon(attributes, renderer) → {String}

Source:

Given feature attributes, return the image URL for that feature/graphic object.

Parameters:
Name Type Description
attributes Object

object of feature attribute key value pairs
renderer Object

an enhanced renderer (see function enhanceRenderer)
Returns:

svgcode Url to the features symbology image

Type
String

getGraphicSymbol(attributes, renderer) → {Object}

Source:

Given feature attributes, return the symbol for that feature/graphic object.

Parameters:
Name Type Description
attributes Object

object of feature attribute key value pairs
renderer Object

an enhanced renderer (see function enhanceRenderer)
Returns:

an ESRI Symbol object in server format

Type
Object

getLayerData() → {Promise}

Source:

Returns layer-specific data for this FC.

Returns:

resolves with a layer data object

Type
Promise

getLayerData(childIndex) → {Promise}

Source:

Returns layer-specific data for a child layer

Parameters:
Name Type Description
childIndex String

the index of the child layer
Returns:

resolves with a layer data object

Type
Promise

getLayerData() → {Promise}

Source:

Returns layer-specific data for this Record

Returns:

resolves with a layer data object

Type
Promise

getLayerType(layer) → {String}

Source:

Will return a string indicating the type of layer a layer object is.

Parameters:
Name Type Description
layer Object

an ESRI API layer object
Returns:

layer type

Type
String

getLegendUrls(wmsLayer, layerList) → {Array}

Source:

Finds the appropriate legend URLs for WMS layers.

Parameters:
Name Type Description
wmsLayer WMSLayer

an ESRI WMSLayer object to be queried
layerList Array

a list of strings identifying the WMS layers to be queried
Returns:

a list of strings containing URLs for specified layers (order is preserved)

Type
Array

(private) getMapServerLegend(layerUrl, esriBundle) → {Promise}

Source:

Returns the legend information of an ESRI map service.

Parameters:
Name Type Description
layerUrl String

service url (root service, not indexed endpoint)
esriBundle Object

collection of ESRI API objects
Returns:

resolves in an array of legend data

Type
Promise

getNorthArrowAngle(map) → {Number}

Source:

Calculate north arrow bearing. Angle returned is to to rotate north arrow image. http://www.movable-type.co.uk/scripts/latlong.html

Parameters:
Name Type Description
map Object

map object
Returns:

map rotation angle (in degree)

Type
Number

getScaleRatio(map, mapWidth) → {Object}

Source:

Calculate distance between min and max extent to know the pixel ratio between screen size and earth distance. http://www.movable-type.co.uk/scripts/latlong.html

Parameters:
Name Type Description
map Object

map object
mapWidth Number

optional the map width to use to calculate ratio
Returns:

contain information about the scale

                          - distance: distance between min and max extentId
                          - ratio: measure for 1 pixel in earth distance
                          - units: array of units [metric, imperial]
Type
Object

getUnboundGraphics(graphicBundles, spatialReference) → {Array}

Source:

Generating a graphic from server geometry.

Parameters:
Name Type Description
graphicBundles Array

set of graphic bundles with properties .graphic, .source, .layer, .featureIdx.
spatialReference Object

the projection the unbound graphics should be in
Returns:

a set of promises that resolve with an unbound graphic, one for each graphic bundle provided

Type
Array

(private) getWMSLayerTitle(wmsLayer, wmsLayerId) → {String}

Source:

Searches for a layer title defined by a wms.

Parameters:
Name Type Description
wmsLayer Object

esri layer object for the wms
wmsLayerId String

layers id as defined in the wms (i.e. not wmsLayer.id)
Returns:

layer title as defined on the service, '' if no title defined

Type
String

getZoomLevel(lods, maxScale) → {Number}

Source:

Takes the lod list and finds level as close to and above scale limit

Parameters:
Name Type Description
lods Array

array of esri LODs https://developers.arcgis.com/javascript/jsapi/lod-amd.html
maxScale Integer

object largest zoom level for said layer
Returns:

current LOD

Type
Number

(private) guessCSVfields(rows) → {Object}

Source:

From provided CSV data, guesses which columns are long and lat. If guessing is no successful, returns null for one or both fields.

Parameters:
Name Type Description
rows Array

csv data
Returns:

an object with lat and long string properties indicating corresponding field names

Type
Object

hideLayers(map) → {Array}

Source:

Set svg-based layer visibility to false to avoid CORS error

Parameters:
Name Type Description
map Object

esri map object
Returns:

layer array of layers where visibility is true

Type
Array

identify(opts) → {Object}

Source:

Run a query on a dynamic layer, return the result as a promise.

Parameters:
Name Type Description
opts Object

additional argumets like map object, clickEvent, etc.
Returns:

an object with identify results array and identify promise resolving when identify is complete; if an empty object is returned, it will be skipped

Type
Object

identify(opts) → {Object}

Source:

Run a query on a feature layer, return the result as a promise. Fills the panelData array on resolution. // TODO update

Parameters:
Name Type Description
opts Object

additional argumets like map object, clickEvent, etc.
Returns:

an object with identify results array and identify promise resolving when identify is complete; if an empty object is returned, it will be skipped

Type
Object

(static) isSpatialRefEqual(sr1, sr2) → {Boolean}

Source:

Checks if two spatial reference objects are equivalent. Handles both wkid and wkt definitions.

Parameters:
Name Type Description
sr1 type

Esri Spatial Reference First to compare
sr2 type

Esri Spatial Reference Second to compare
Returns:

true if the two spatial references are equivalent. False otherwise.

Type
Boolean

(private) loadDataBatch(opts, callerDef)

Source:

Recursive function to load a full set of attributes, regardless of the maximum output size of the service. Passes result back on the provided Deferred object.

Parameters:
Name Type Description
opts Object

options object that consists of these properties

    - maxId: integer, largest object id that has already been downloaded.
    - supportsLimit: boolean, indicates if server result will notify us if our request surpassed the record limit.
    - batchSize: integer, maximum number of results the service will return. if -1, means currently unknown. only required if supportsLimit is false.
    - layerUrl: string, URL to feature layer endpoint.
    - oidField: string, name of attribute containing the object id for the layer.
    - attribs: string, a comma separated list of attributes to download. '*' will download all.
    - esriBundle: object, standard set of ESRI API objects.
callerDef Object

deferred object that resolves when current data has been downloaded

loadFeatureAttribs(layerUrl, featureIdx, attribs, esriBundle) → {Object}

Source:

fetch attributes from an ESRI ArcGIS Server Feature Layer Service endpoint

Parameters:
Name Type Description
layerUrl String

an arcgis feature layer service endpoint
featureIdx Integer

index of where the endpoint is. used for legend output
attribs String

a comma separated list of attributes to download. '*' will download all
esriBundle Object

bundle of API classes
Returns:

attributes in a packaged format for asynch access

Type
Object

localProjectExtent(extent, sr) → {Object}

Source:

Reproject an EsriExtent object on the client. Does not require network traffic, but may not handle conversion between projection types as well. Internally it tests 8 points along each edge and takes the max extent of the result.

Parameters:
Name Type Description
extent EsriExtent

to reproject
sr Object

is the target spatial reference (if a number it will be treated as a WKID)
Returns:

an extent as an unstructured object

Type
Object

localProjectGeometry(destProj, geometry) → {Object}

Source:

Project a single point.

Parameters:
Name Type Description
destProj Object | Integer | String

the spatial reference of the result (as ESRI SpatialReference, integer WKID or an EPSG string)
geometry Object

an object conforming to ESRI Geometry object standards containing the coordinates to Reproject
Returns:

an object conforming to ESRI Geomtery object standards containing the input geometry in the destination projection

Type
Object

localProjectPoint(srcProj, destProj, point) → {Array|Object}

Source:

Project a single point.

Parameters:
Name Type Description
srcProj Object | Integer | String

the spatial reference of the point (as ESRI SpatialReference, integer WKID or an EPSG string)
destProj Object | Integer | String

the spatial reference of the result (as ESRI SpatialReference, integer WKID or an EPSG string)
point Array | Object

a 2d array or object with {x,y} props containing the coordinates to Reproject
Returns:

a 2d array or object containing the projected point

Type
Array | Object

makeBasemaps(basemapsConfig, map, anchorId) → {Object}

Source:

Make basemap gallery based on the settings of basemap metadata.

Parameters:
Name Type Description
basemapsConfig Object

json config object contains collection/array of basemap settings
map esriMap

ESRI map object
anchorId String

DOM element where the dijit will be placed
Returns:

an object with the following properties:

  • setBasemap {function} set current basemap with a basemap uid
  • basemapGallery {object} basemapGallery object
Type
Object

makeBoundingBox(id, extent, targetSr) → {GraphicsLayer}

Source:

Makes a bounding box layer (a graphics layer with one rectangle graphic matching the supplied extent).

Parameters:
Name Type Description
id String

the id of the bounding box to be created
extent EsriExtent

an ESRI extent object to be used for the graphics boundaries
targetSr SpatialReference

an ESRI spatial reference which is used for projecting the result
Returns:

an ESRI GraphicsLayer

Type
GraphicsLayer

makeGeoJsonLayer(geoJson, opts) → {Promise}

Source:

Converts a GeoJSON object into a FeatureLayer. Expects GeoJSON to be formed as a FeatureCollection containing a uniform feature type (FeatureLayer type will be set according to the type of the first feature entry). Accepts the following options:

  • targetWkid: Required. an integer for an ESRI wkid to project geometries to
  • renderer: a string identifying one of the properties in defaultRenders
  • sourceProjection: a string matching a proj4.defs projection to be used for the source data (overrides geoJson.crs)
  • fields: an array of fields to be appended to the FeatureLayer layerDefinition (OBJECTID is set by default)
  • epsgLookup: a function that takes an EPSG code (string or number) and returns a promise of a proj4 style definition or null if not found
  • layerId: a string to use as the layerId
  • colour: a hex string to define the symbol colour. e.g. '#33DD6A'
Parameters:
Name Type Description
geoJson Object

An object following the GeoJSON specification, should be a FeatureCollection with Features of only one type
opts Object

An object for supplying additional parameters
Returns:

a promise resolving with a {FeatureLayer}

Type
Promise

makeHilightLayer(options) → {Object}

Source:

Generate a graphic layer to handle feature hilighting.

Parameters:
Name Type Description
options Object

optional settings for the hilight layer layerId - id to use for the hilight layer. defaults to rv_hilight pinSymbol - esri symbol in server json format to symbolize the click marker. defaults to a red pin hazeOpacity - how opaque the haze sheet behind the hilight is. 0 to 255, 0 being transparent. defaults to 127
Returns:

an ESRI GraphicsLayer

Type
Object

makeLegend(layerList, sectionsAvailable, mapHeight)

Source:

Generate the structure for a legend given a set of layers.

Parameters:
Name Type Description
layerList Array

a list of layers to be updated (modified in place)
sectionsAvailable int

the maximum number of sections to use
mapHeight int

the rendered height of the map image
Returns:

an object with properties layers, sectionsUsed. (layerList is modified in place)

mapDefault(key, value)

Source:

Sets or gets map default config values.

Parameters:
Name Type Description
key String

name of the default property
value Any

value to set for the specified default property

(private) mapServerLegendToRenderer(serverLegend, layerIndex) → {Object}

Source:

Our symbology engine works off of renderers. When dealing with layers with no renderers, we need to take server-side legend and convert it to a fake renderer, which lets us leverage all the existing symbology code.

Parameters:
Name Type Description
serverLegend Object

legend json from an esri map server
layerIndex Integer

the index of the layer in the legend we are interested in
Returns:

a fake unique value renderer based off the legend

Type
Object

mapServerToLocalLegend(mapServerUrl, layerIndex) → {Promise}

Source:

Orchestrator function that will:

  • Fetch a legend from an esri map server
  • Extract legend for a specific sub layer
  • Convert server legend to a temporary renderer
  • Convert temporary renderer to a viewer-formatted legend (return value)
Parameters:
Name Type Description
mapServerUrl String

service url (root service, not indexed endpoint)
layerIndex Integer

the index of the layer in the legend we are interested in
Returns:

resolves in a viewer-compatible legend for the given server and layer index

Type
Promise

(private) newLayerBundle() → {Object}

Source:

Will generate an empty object structure to store a bundle of attributes for a full layer

Returns:

empty layer bundle object

Type
Object

(private) newLayerPackage(featureIdx, esriBundle) → {Object}

Source:

Will generate an empty object structure to store attributes for a single layer of features

Parameters:
Name Type Description
featureIdx Integer

server index of the layer
esriBundle Object

bundle of API classes
Returns:

empty layer package object

Type
Object

(private) newProp(target, propName, getter)

Source:

Worker function to add or override a get property on an object

Parameters:
Name Type Description
target Object

the object that will receive the new property
propName String

name of the get property
getter function

the function defining the guts of the get property.

(private) normalizeProj(proj) → {String}

Source:

Convert a projection to an string that is compatible with proj4. If it is an ESRI SpatialReference or an integer it will be converted.

Parameters:
Name Type Description
proj Object | Integer | String

an ESRI SpatialReference, integer or string. Strings will be unchanged and unchecked, ints and SpatialReference objects will be converted.
Returns:

A string in the form EPSG:####

Type
String

onLoad()

Source:

Triggers when the layer loads.

onLoad()

Source:

Triggers when the layer loads.

onLoad()

Source:

Triggers when the layer loads.

onLoad()

Source:

Triggers when the layer loads.

onLoad()

Source:

Triggers when the layer loads.

onLoad()

Source:

Triggers when the layer loads.

(private) packLayersIntoExactSections(layers, sections) → {Object}

Source:

Groups multiple layers into each section while attempting to minimize the legend height. Allocates to the exact number specified in the sections argument. NOTE: don't call this with too many layers as it tests all possible groupings and can be computationally expensive (< 15 layers should be fine)

Parameters:
Name Type Description
layers Array

a list of layers to be fitted
sections int

the number of sections to use
Returns:

an object in the form { layers, sectionsUsed, bestPerm, bestHeight }

Type
Object

(private) packLayersIntoOptimalSections(layers, sections) → {Object}

Source:

Groups multiple layers into each section while attempting to minimize the legend height. Repeats as necessary to use the least number of sections while still keeping the resulting legend height within 20% of optimal. NOTE: don't call this with too many layers as it tests all possible groupings and can be computationally expensive (< 15 layers should be fine)

Parameters:
Name Type Description
layers Array

a list of layers to be updated (modified in place)
sections int

the number of sections to use
Returns:

an object in the form { layers, sectionsUsed }

Type
Object

predictLayerUrl(url, hint) → {Promise}

Source:

Attempts to determine what kind of layer the URL most likely is, and if possible, return back some useful information about the layer

  • serviceType: the type of layer the function thinks the url is referring to. is a value of serviceType enumeration (string)
  • fileData: file contents in an array buffer. only present if the URL points to a file that exists on an internet server (i.e. not a local disk drive)
  • name: best attempt at guessing the name of the service (string). only present for ESRI service URLs
  • fields: array of field definitions for the layer. conforms to ESRI's REST field standard. only present for feature layer and image service URLs.
  • geometryType: describes the geometry of the layer (string). conforms to ESRI's REST geometry type enum values. only present for feature layer URLs.
  • groupIdx: property only available if a group layer is queried. it is the layer index of the group layer in the list under its parent dynamic layer
Parameters:
Name Type Description
url String

a url to something that is hopefully a map service
hint String

optional. allows the caller to specify the url type, forcing the function to run the data logic for that type
Returns:

a promise resolving with an infomation object

Type
Promise

(private) processDynamicLayer(layer, options, esriBundle) → {Object}

Source:

Ochestrate the attribute extraction of a dynamic map service layer object.

Parameters:
Name Type Description
layer Object

an ESRI API Dynamic Map Service layer object
options Object

information on layer and attribute skipping
esriBundle Object

bundle of API classes
Returns:

attributes in layer bundle format (see newLayerBundle)

Type
Object

(private) processFeatureLayer(layer, options, esriBundle) → {Object}

Source:

Ochestrate the attribute extraction of a feature layer object.

Parameters:
Name Type Description
layer Object

an ESRI API Feature layer object
options Object

information on layer and attribute skipping
esriBundle Object

bundle of API classes
Returns:

attributes in layer bundle format (see newLayerBundle)

Type
Object

projectGeojson(geojson, outputSpatialReference, inputSpatialReference)

Source:

Reproject a GeoJSON object in place. This is a wrapper around terraformer-proj4js.

Parameters:
Name Type Description
geojson Object

the GeoJSON to be reprojected, this will be modified in place
outputSpatialReference String | Number

the target spatial reference, 'EPSG:4326' is used by default; if a number is suppied it will be used as an EPSG code
inputSpatialReference String | Number

same rules as outputSpatialReference if suppied if missing it will attempt to find it encoded in the GeoJSON

projectionLookup()

Source:

Makes an attempt to load and register a projection definition. Returns promise resolving when process is complete projModule - proj module from geoApi projCode - the string or int epsg code we want to lookup epsgLookup - function that will do the epsg lookup, taking code and returning promise of result or null

(private) resizeSVGElement(element, targetSize, targetViewbox) → {Object}

Source:

Scales up or down the specified svg element. To scale it, we need to set the viewbox to the current size and change the size of the element itself.

Parameters:
Name Type Description
element Object

target svg element to be resized
targetSize Object

object with target sizes in the form of { width, height } width {Number} height {Number}
targetViewbox Object

[optional = null] target viewbox sizes in the form of { minX, minY, width, height }; if not specified, the original size will be used as the viewbox minX {Number} minxY {Number} width {Number} height {Number}
Returns:

returns original size and viewbox of the svg element in the form of { originalSize: { width, height }, originalViewbox: { minX, minY, width, height } }; can be used to restore the element to its original state originalSize: width {Number} height {Number} originalViewbox: minX {Number} minxY {Number} width {Number} height {Number}

Type
Object

(private) scrapeListRenderer(renderer, childList, window) → {Array}

Source:

Generate an array of legend items for an ESRI unique value or class breaks renderer.

Parameters:
Name Type Description
renderer Object

an ESRI unique value or class breaks renderer
childList Array

array of children items of the renderer
window Object

reference to the browser window
Returns:

a legend object populated with the symbol and label

Type
Array

searchRenderer(attributes, renderer) → {Object}

Source:

Given feature attributes, find the renderer node that would draw it

Parameters:
Name Type Description
attributes Object

object of feature attribute key value pairs
renderer Object

an enhanced renderer (see function enhanceRenderer)
Returns:

an Object with svgcode and symbol properties for the matched renderer item

Type
Object

serverLayerIdentify(layer, opts) → {Promise}

Source:

Perform a server-side identify on a layer (usually an ESRI dynamic layer) Accepts the following options:

  • geometry: Required. geometry in map co-ordinates for the area to identify. will usually be an ESRI Point, though a polygon would work.
  • mapExtent: Required. ESRI Extent of the current map view
  • width: Required. Width of the map in pixels
  • height: Required. Height of the map in pixels
  • layerIds: an array of integers specifying the layer indexes to be examined. Will override the current visible indexes in the layer parameter
  • returnGeometry: a boolean indicating if result geometery should be returned with results. Defaults to false
  • tolerance: an integer indicating how many screen pixels away from the mouse is valid for a hit. Defaults to 5
Parameters:
Name Type Description
layer Object

an ESRI dynamic layer object
opts Object

An object for supplying additional parameters
Returns:

a promise resolving with an array of identify results (empty array if no hits)

Type
Promise

setProxy(proxyUrl)

Source:

Set proxy service URL to avoid same origin issues.

Parameters:
Name Type Description
proxyUrl string

should point to a proxy with an interface compatible with ESRI's resource proxy

setupMap(map, settings) → {Object}

Source:

Setup map features with info provided by configuration.

Parameters:
Name Type Description
map esriMap

ESRI map object
settings Object

JSON object of map configurations
Returns:

with following properties:

  • BasemapControl - an object with setBasemap function and a BasemapGallery object
  • OverviewMapControl - a reference to the overviewMap control on the map
  • ScalebarControl - a reference to the scalebar control on the map
Type
Object

showLayers(layers)

Source:

Set user added layer visibility to true for those whoe where visible

Parameters:
Name Type Description
layers Array

array of graphic layers to set visibility to true

(private) splitLayer(layer, chunkSize, splitCount)

Source:

Split a layer into splitCount parts of roughly equal size.

Parameters:
Name Type Description
layer Object

a layer object to be split into splitCount parts
chunkSize int

the maximum height in pixels of the legend sections
splitCount int

the number of pieces which the layer should be broken into
Returns:

an object with properties whiteSpace: , splits: [ ]

(private) svgDrawImage(draw, imageUri, width, height, crossOrigin) → {Promise}

Source:

Renders a specified image on an svg element. This is a helper function that wraps around async draw.image call in the svg library.

Parameters:
Name Type Description
draw Object

svg element to render the image onto
imageUri String

image url or dataURL of the image to render
width Number

[optional = 0] width of the image
height Number

[optional = 0] height of the image
crossOrigin Boolean

[optional = true] specifies if the image should be loaded as crossOrigin
Returns:

promise resolving with the loaded image and its loader object (see svg.js http://documentup.com/wout/svg.js#image for details)

Type
Promise

(private) symbolToLegend(symbol, label, window) → {Object}

Source:

Generate a legend item for an ESRI symbol.

Parameters:
Name Type Description
symbol Object

an ESRI symbol object in server format
label String

label of the legend item
window Object

reference to the browser window
Returns:

a legend object populated with the symbol and label

Type
Object

(private) validateCSV(data) → {Promise}

Source:

Performs validation on csv data. Returns a promise resolving with the validation object. Worker function for validateFile, see that file for return value specs

Parameters:
Name Type Description
data Object

csv data as string
Returns:

promise resolving with information on the csv data

Type
Promise

validateFile(type, data) → {Promise}

Source:

Validates file content. Does some basic checking for errors. Attempts to get field list, and if possible, provide the file in a more useful format. Promise rejection indicates failed validation

  • formattedData: file contents in a more useful format. JSON for GeoJSON and Shapefile. String for CSV
  • fields: array of field definitions for the file. conforms to ESRI's REST field standard.
  • geometryType: describes the geometry of the file (string). conforms to ESRI's REST geometry type enum values.
Parameters:
Name Type Description
type String

the format of file. aligns to serviceType enum (CSV, Shapefile, GeoJSON)
data Arraybuffer

the file content in binary
Returns:

a promise resolving with an infomation object

Type
Promise

(private) validateGeoJson(geoJson) → {Promise}

Source:

Performs validation on GeoJson object. Returns a promise resolving with the validation object. Worker function for validateFile, see that file for return value specs

Parameters:
Name Type Description
geoJson Object

feature collection in geojson form
Returns:

promise resolving with information on the geoJson object

Type
Promise

validateLatLong(arr, ind1, ind2) → {Boolean}

Source:

Given 2D array in column x row format, check if all entries in the two given columns are numeric.

Parameters:
Name Type Description
arr Array

is a 2D array based on the CSV file that contains row information for all of the rows
ind1 Integer

is a user specified index when uploading the CSV that specifies lat or long column (whichever isn't specified by ind2)
ind2 Integer

is a user specified index when uploading the CSV that specifies lat or long column (whichever isn't specified by ind1)
Returns:

returns true or false based on whether or not all all columns at ind1 and ind2 are numbers

Type
Boolean

wrapEvents(esriObject, handlers)

Source:

Wire up any supplied handlers to the corresponding dojo .on events on layer. Purpose is to keep Dojo .on events contained in geoApi.

Parameters:
Name Type Description
esriObject esriObject

which contains the dojo events to be wrapped
handlers handlers

is an object which contains all handlers needed